What type of sandblasting machine is used for aluminum parts?

Choosing a suitable sandblasting machine for aluminum parts needs to consider the shape, size, production efficiency requirements and surface treatment effect of aluminum parts. The following are some common types and applicable situations:

Manual sandblasting machine

Features: the operation is flexible, the position and angle of sandblasting can be adjusted at any time as needed, and the aluminum parts with complex and irregular shapes can be treated in detail, and the equipment cost is relatively low.

Applicable scenes: small batch and various kinds of aluminum parts processing, and occasions that require high sandblasting accuracy and need manual fine control, such as aluminum handicrafts and small precision parts.

Automatic sandblasting machine

Conveying sandblasting machine for aluminum products;

Features: the crawler belt is used to convey the workpiece, which can realize continuous operation and high production efficiency. The angle of the spray gun can be adjusted freely, and it can realize automatic variable frequency swing and fixed-point sandblasting with strong flexibility. Equipped with advanced upper cyclone separation system, the dust separation effect is good and the sandblasting efficiency is high; It also adopts PLC electrical control system, which has high degree of automation, good stability and low failure rate.

Application: It is suitable for sandblasting aluminum products such as flat plates, disks, cubes, profiles and other special-shaped workpieces, such as flat aluminum products, non-stick pans, baking pans, computer cases, decorative parts, communication equipment, aluminum plates and profiles, etc.

Rotary table sandblasting machine for aluminum products;

Features: The turntable automatically rotates intermittently or continuously, with stable operation. There are multiple stations, the large turntable operates intermittently, the small turntable rotates, the spray gun can be freely adjusted horizontally and vertically, the sandblasting time can be set by itself according to the effect, the spray gun can also swing or sand blast at fixed points, and the swing speed and the rotation of the small turntable can be adjusted by frequency conversion. Using PLC electrical control system, it has high degree of automation, good stability, low failure rate, and independent pulse filter element for dust removal, good ventilation performance, environmental protection and no pollution.

Applicable scene: sandblasting of various round, oval, square, dish and special-shaped aluminum products, such as non-stick pan, electric frying pan, rice cooker, baking pan, microwave oven, washing basin, heating pan, aluminum outline, handicrafts, decorations and communication equipment.

Roller crawler sandblasting machine for aluminum products;

Features: aluminum parts are driven to rotate by roller or crawler, so that all surfaces of aluminum parts can be evenly sandblasted. It can handle small and scattered aluminum parts, avoid mutual collision and damage between workpieces, and also improve sandblasting efficiency.

Application scenario: suitable for small aluminum parts, such as screws, nuts, trinkets, etc., and can be sandblasted in batches.

In addition, according to the working principle, sandblasting machines can also be divided into pressure type, suction type and pressure suction type. Pressure sandblasting machine has high spraying speed and strong spraying force, and is suitable for cleaning and processing large-area aluminum parts; Suction sandblasting machine is easy to operate and easy to clean, and is suitable for sandblasting cleaning of small-area fine parts. The pressure suction sandblasting machine combines the advantages of both and is suitable for aluminum parts treatment in various situations.