Give you a brief introduction: how does our sandblasting machine remove rust easily?

Sand blasting machine rust removal is a common metal surface treatment method. The following are some steps and methods of derusting by sandblasting machine:

Preparation: First of all, it is necessary to clean the metal surface that needs rust removal, and remove impurities such as oil stain and dust on the surface to ensure that the sandblasting machine can fully contact the metal surface.

Selection of sand: Select suitable sand for sand blasting and rust removal. In general, the sand used for derusting by sandblasting machine should be harder than the metal surface to ensure that the rust and stains on the surface can be removed.

Sand blasting for rust removal: add the selected sand into the sand blasting machine and start the machine for rust removal. In the process of sandblasting, attention should be paid to controlling the pressure of sandblasting and the distance of sandblasting machine to ensure the uniform strength and effect of sandblasting.

Cleaning: After sand blasting and rust removal, it is necessary to clean the sand in the sand blasting machine and the rust on the metal surface. At the same time, it is necessary to clean and maintain the sandblasting machine to ensure that it can work normally next time.

It should be noted that the derusting of sandblasting machine is a complicated work, and it is necessary to adjust and operate the sandblasting machine reasonably to ensure the derusting effect and work efficiency. At the same time, we also need to pay attention to safety issues to avoid the harm of flying sand and foreign bodies to human body and surrounding environment during sandblasting.