Kunshan sand blasting machine is a modern casting cleaning equipment with high efficiency and low investment. It is usually used to remove rust and rust on the surface of corrosive materials or workpieces, and to remove oxide scale of non rusty metals. In daily work, the operation rules of sandblasting machine are directly related to safety production. Next, Kunshan huaguanshen sandblasting machinery will talk about the safety operation procedures and uses of Kunshan sandblasting machine.

Safety operation regulations for Kunshan sandblasting machine:

1. The air tank, pressure gauge and safety valve of sand blasting machine shall be calibrated regularly. Dust is discharged from the air tank once every two weeks, and the filter in the sand tank is checked once a month.

2. Check whether the ventilation pipe and door of sandblasting machine are sealed. Five minutes before work, the ventilation and dust removal equipment must be started. When the ventilation and dust removal equipment fails, the sand blasting machine is prohibited to work.

3. Wear protective equipment before work, and do not operate sandblasting machine with bare arm.

4. The compressed air valve of sand blasting machine shall be opened slowly, and the air pressure shall not exceed 0.8MPa.

5. The particle size of sand blasting shall be suitable for the working requirements, generally between No.10 and No.20, and the sand shall be kept dry.

6. When sandblasting machine is working, irrelevant personnel are forbidden to approach. When cleaning and adjusting the operating parts, the machine should be stopped.

7. Do not use the compressed air of sandblasting machine to blow dust on the body.

8. After the work, the sand blasting machine ventilation and dust removal equipment should continue to run for five minutes and then shut down to discharge the indoor dust and keep the site clean.

9. In case of personal and equipment accidents, the scene shall be maintained, and the emergency hotline shall be timely called and reported to the relevant departments.

Application of Kunshan sand blasting equipment:

Kunshan sandblasting equipment has been widely used in machinery manufacturing, instrumentation, medical equipment, electronic appliances, textile machinery, printing and dyeing machinery, ceramics, handicrafts, mechanical repair and many other fields. Sand blasting equipment as a conventional sand treatment equipment, after continuous development, improvement and improvement, has a unique processing mechanism and a wide range of processing, application, sandblasting equipment in today's surface treatment industry more and more favored.

Function of equipment:

1. Kunshan sand blasting equipment is used for cleaning the surface of workpieces. The sand blasting equipment can be used to treat the rust layer of metal, residual salt and oxide layer on the surface of heat-treated parts, oxidation layer on the surface of rolling parts, oxidation layer on the surface of forged parts, oxide layer on the surface of welding parts, molding sand and oxide layer on the surface of castings, residual dirt and micro burr on the surface of machining parts, and surface of old parts In addition to the surface adhesion layer, the original color of the substrate is revealed.

2. Kunshan sandblasting equipment is used for pretreatment of workpiece surface before coating. Sand blasting equipment can be used as pretreatment process of various electroplating, brush plating, spraying and bonding processes to obtain active surface and improve the adhesion between coating, coating and bonding parts.

3. The sand blasting equipment can change the physical and mechanical properties of the workpiece. The sand blasting equipment can change the surface stress state of the workpiece, improve the lubrication conditions of the matching parts, reduce the noise during the movement of the coupling parts, make the surface of the workpiece harden, and improve the wear resistance and fatigue strength of the parts.

4. Kunshan sandblasting equipment is used for surface finishing of workpieces. Sandblasting equipment can change the Ra value of workpiece surface to produce matte or diffuse reflection surface, so as to achieve the purpose of finishing.